F-35 maintenance depots will get new avionics test sets, refreshed test software, cybersecurity upgrades and more room to repair ejection seats under a $93.2 million Navy order to Lockheed Martin, a package that targets the repair-and-return side of the fighter fleet rather than new aircraft. Naval Air Systems Command placed the $93,246,155 order with Lockheed Martin Corp. of Fort Worth, Texas, according to the Department of War's Nov. 17, 2026 contract announcement, mirrored by GlobalSecurity. The order, N0001927F1052, is a cost-plus-fixed-fee, firm-fixed-price order issued against basic ordering agreement N0001924G0010, and it supports the Air Force, Navy, Marine Corps and the F-35 cooperative program partners.
The work runs through January 2030. Most of it will happen far from Fort Worth: 63% in Malabar, Florida, and 23% in Nashua, New Hampshire, with smaller shares in San Diego, Guildford in the United Kingdom, and Cherry Point, North Carolina.
What the $93.2M F-35 Depot Order Buys
The announcement describes the order as providing "avionics test equipment, test program set updates, cybersecurity upgrades, and specialized repair capabilities in support of F-35 Lightning II depot maintenance and sustainment." It then lists five specific deliverables:
- Panoramic Cockpit Display Electronics Unit test sets, equipment to test the electronics behind the F-35's cockpit display.
- Communication, Navigation, and Identification Processor test program sets, the kind of software and interface packages depots use to diagnose a processor.
- Phase Two electronic warfare subsystem operating system upgrades.
- Air Interceptor System Golden units, which the announcement does not define.
- Ejection seat repair capacity expansion.
Beyond the hardware and software, the Pentagon notice says "the order also provides associated engineering, program management, technical data, planning, readiness reviews, and introduction-to-service support for the Air Force, Navy, Marine Corps, and F-35 cooperative program partners." That last phrase suggests work beyond shipping equipment, since introduction-to-service support typically means helping new capability get fielded at the user site.
Why Test Sets and Seat Repairs Drive F-35 Readiness
A failed aircraft component generally goes to a repair source that must first establish what is wrong. Without the right test set or an up-to-date test program set, a depot cannot diagnose a unit, and a part that cannot be diagnosed cannot be repaired locally. The order's emphasis on test equipment and test program set updates aligns with that diagnostic need.
The announcement lists cybersecurity upgrades and Phase Two electronic warfare operating system upgrades as separate items without explaining how they connect. The package pairs hardware, software and security work in a single order.
Ejection seats are a separate line of effort, and the announcement calls out "ejection seat repair capacity expansion" explicitly. Expanding capacity rather than simply funding repairs signals that the program wants more throughput for seat repair.
Where the Malabar-Heavy Work Split Lands
The geographic split shows that a Lockheed prime award can direct most of its work to locations other than the prime's home city. Fort Worth, Lockheed's address in the announcement, does not appear in the place-of-performance list at all. The announcement lists Malabar, Florida (63%); Nashua, New Hampshire (23%); San Diego (7%); Guildford, United Kingdom (6%); and Cherry Point, North Carolina (1%).
The Guildford share reflects the international character of the F-35 enterprise, which the funding lines also show. The announcement does not say what tasks fall at each location.
How the Air Force, Navy and Partners Split the Bill
The order is funded at award from three sources, according to the announcement:
- $41,033,354 in fiscal 2026 Air Force aircraft procurement funds
- $41,033,350 in fiscal 2026 Navy aircraft procurement funds
- $11,179,451 in F-35 cooperative program partner funds
The three amounts sum to the full $93,246,155. The Air Force and Navy lines are nearly identical, differing by four dollars, which fits an order whose equipment serves multiple services. The partner contribution, about 12% of the total, shows the cooperative program partners paying into sustainment capability.
Because the announcement says these funds will be obligated at the time of award, the full $93.2 million is not a ceiling or an unexercised option.
Why the Navy Placed It Without Competition
The announcement states plainly: "This order was not competitively procured." The order was placed against a previously issued basic ordering agreement with Lockheed. A basic ordering agreement sets terms and pricing methods in advance, then lets the contracting office issue individual orders as requirements firm up. Naval Air Systems Command at Patuxent River, Maryland, is the contracting activity.
The mixed contract type, cost-plus-fixed-fee and firm-fixed-price in a single order, may mean the government priced well-defined deliverables at fixed prices while keeping engineering-heavy pieces on a cost-reimbursement basis, though that is an inference. The announcement does not break out how much of the value falls under each type.
The order also appeared in Aerotech News & Review's Nov. 18 contract briefs, which listed the same $93,246,155 value, the same order number and the January 2030 completion date.
What It Means for Contractors
Depot sustainment money flows through suppliers. With no Fort Worth work share, the work executes at other locations. Firms that build test equipment, write test program sets or repair aircrew escape systems should track F-35 basic ordering agreement orders as a possible pipeline, even though this order was not competed.
Test program sets are a possible niche. The order pairs new test hardware with software updates and cybersecurity work. Companies with automatic test equipment, test program set development or secure test-station experience may find openings at the subcontract tier.
Introduction-to-service is explicit scope. Readiness reviews, technical data and planning appear as named parts of the order. Engineering services firms with depot support experience may be able to position for that labor.
Partner funding widens the customer base. The $11.2 million partner contribution and the Guildford work share show that allied money and allied industry sit inside this U.S. order. Suppliers should be ready for international partner requirements, and export-control obligations, on this kind of work.
Watch the ordering agreement. Basic ordering agreement N0001924G0010 is a vehicle that can carry additional orders, so follow-on test set, upgrade and repair-capacity orders are possible.